Category: introduction to sewing (original)

5: threading the sewing machine (front loading bobbin)

Going over the bobbin can be tricky, because not every machine is alike.  There are two basic types, the top loading bobbin without a bobbin case, and the front loading bobbin with a bobbin case (which we’re going over here).  Because the threading methods for these two types of machines are so different, I’ve decided […]

Read more

5: threading the sewing machine (top loading bobbin)

Going over the bobbin can be tricky, because not every machine is alike.  There are two basic types, the top loading bobbin without a bobbin case (which we’re going over here), and the front loading bobbin with a bobbin case.  Because the threading methods for these two types of machines are so different, I’ve decided […]

Read more

5: threading the sewing machine (bobbin)

**Note** If you are unfamiliar with any of the parts of the sewing machine, you can see the previous lesson, HERE. The first step when dealing with your bobbin is to wind the thread onto the bobbin.  This should be essentially the same on most machines, but if yours differs from mine refer to your […]

Read more

5: threading the sewing machine (upper)

***NOTE: If you are unfamiliar with any of the parts of the sewing machine, you can see the previous lesson, HERE*** Threading your machine becomes mindless when you’ve done it repeatedly, but it can take a while to master.  This tutorial is to guide you through the typical threading path for the upper thread.  For […]

Read more

5: threading the sewing machine

There are two basic parts to threading the sewing machine: threading the upper thread, and threading the bobbin. In hopes of keeping this as simple as possible, I’ve divided this lesson into those two parts. Click on an image below to learn more.

Read more